LOGIQ AirIQ HD2 Heavy Duty 2-Channel Air Management System

Take full control of your truck’s load-leveling air springs with the LOGIQ AirIQ HD2 Heavy Duty 2-Channel Air Management System. Designed for trucks that tow, haul, or regularly operate under changing loads, the AirIQ HD2 combines a high-output heavy-duty compressor with independent dual-channel air spring control in a compact, preassembled system.

With individual control of the driver- and passenger-side air springs, the AirIQ HD2 allows you to compensate for uneven loads while maintaining proper ride height and stability. Control the system wirelessly through the free AirIQ smartphone app or select the optional AirIQ Remote for dedicated in-cab control.

Independent 2-Channel Air Spring Control

Unlike a single-channel air management system that fills both air springs equally, the AirIQ HD2 provides independent control of two air springs.

This allows the driver and passenger sides to be adjusted separately, making it easier to compensate for uneven cargo, slide-in campers, trailers, auxiliary fuel tanks, toolboxes, and other loads that may place more weight on one side of the truck.

Independent air spring control is particularly useful for trucks that regularly tow or haul varying loads and need greater flexibility from their air suspension system.

Heavy Duty Air Compressor

The AirIQ HD2 upgrades to LOGIQ's heavy-duty compressor for faster air delivery and increased capability.

The compressor produces 2.62 CFM at 0 PSI, operates at up to 150 PSI, and features a 33% duty cycle at 100 PSI. This increased output makes the HD2 well suited for larger trucks, frequent towing, and applications where air spring pressure is adjusted regularly.

Heavy Duty compressor specifications include:

• 2.62 CFM output at 0 PSI
• Maximum operating pressure up to 150 PSI
• 33% duty cycle at 100 PSI
• 12-volt electrical system
• 40-amp current draw
• Designed for demanding load-leveling applications

AirIQ Smartphone App Control

Control air spring pressure directly from your compatible smartphone using the free LOGIQ AirIQ App.

Wireless control eliminates the need for a permanently mounted gauge-and-switch panel inside the cab while allowing quick adjustments when hooking up a trailer, loading cargo, or changing vehicle weight.

The two-channel system allows each rear air spring to be controlled individually through the AirIQ management system.

Optional AirIQ Remote Control

Prefer dedicated physical controls instead of using your phone? The AirIQ HD2 is also available with the LOGIQ AirIQ Remote.

The optional remote provides convenient access to the air management system without requiring a smartphone, making it a great addition for customers who tow frequently or want dedicated air suspension controls readily available inside the vehicle.

Factory-Assembled Air Management System

LOGIQ AirIQ systems are factory assembled and tested before installation. The compressor, valves, electronics, and air management components are integrated into a compact system, reducing the amount of individual component mounting and plumbing required during installation.

The included frame-mounting brackets make it easy to securely install the assembly underneath a wide variety of trucks.

IP67-Rated Components

The AirIQ HD2 components carry an IP67 ingress-protection rating, helping protect the system against dust and water encountered underneath a truck.

This makes the system well suited for daily-driven work trucks, tow rigs, overland vehicles, and off-road builds where components may regularly encounter dirt, water, and road debris.

Universal Air Spring Compatibility

The LOGIQ AirIQ HD2 is designed as a universal air management system for load-leveling and helper air spring applications.

It can be paired with compatible aftermarket air spring systems across a wide variety of Ford, Ram, Chevrolet, GMC, Toyota, and other truck applications. Vehicle-specific air springs are sold separately unless otherwise specified.

Kit Includes

The LOGIQ AirIQ HD2 package includes:

• (1) AirIQ HD2 Air Management System
• Heavy Duty air compressor
• Dual-channel air management valving
• Pre-installed 20-foot wiring harness
• (4) frame-mounting brackets
• Frame-mounting hardware
• 20 feet of 1/4-inch air line
• Fuse taps
• 18 feet of wire loom
• AirIQ HD2 installation hardware
• AirIQ App compatibility
• Optional AirIQ Remote compatibility

The system arrives largely assembled to simplify installation and reduce the amount of individual compressor and valve plumbing required.

Technical Specifications

• Channels: 2
• Compressor Output: 2.62 CFM @ 0 PSI
• Compressor Duty Cycle: 33% @ 100 PSI
• Maximum Compressor Pressure: 150 PSI
• Ingress Protection: IP67
• Operating Voltage: 12V
• Current Draw: 40 Amps
• Air Line Size: 1/4 inch
• Included Wiring Harness: 20 feet
• Control: AirIQ App or optional AirIQ Remote
• SKU: 50-42200

Features and Benefits

• Heavy-duty 2-channel air management system
• Independent driver- and passenger-side air spring adjustment
• High-output 2.62 CFM compressor
• Up to 150 PSI compressor capability
• 33% compressor duty cycle
• Wireless smartphone control through the AirIQ App
• Optional dedicated AirIQ Remote
• Factory-assembled and tested system
• IP67-rated components
• Easy frame-mounting bracket system
• Complete plumbing and wiring installation kit
• Universal compatibility with compatible helper air spring systems
• Designed for towing and load-leveling applications
• Lifetime warranty advertised by LOGIQ

Ideal for Towing and Hauling

The AirIQ HD2 is an excellent choice for trucks regularly used to tow travel trailers, fifth wheels, boats, equipment trailers, or enclosed trailers. It is also well suited for trucks carrying slide-in campers, service bodies, bed-mounted equipment, tools, and other heavy or uneven loads.

With independent left-to-right air spring adjustment and a heavy-duty compressor, the HD2 makes it easy to adjust the suspension as vehicle load changes.

Pair the LOGIQ AirIQ HD2 with a properly selected helper air spring system for convenient onboard air management without manually filling air springs at an external compressor.